Cart

Your Cart is Empty

Back To Shop

Cart

Your Cart is Empty

Back To Shop
Sale

Kreg 720 Pro Pocket-Hole Jig

Original price was: $149.00.Current price is: $74.50.

(In Stock)

size:

From the latest generation of Kreg’s pocket-hole joinery system, this sturdy, versatile jig is quick to set up and easy to use, letting you make strong pocket-hole joints in a wide range of applications.

\n

To hold the jig in position while you drill, its built-in lever-operated clamp can be operated one-handed and automatically adjusts for stock thicknesses from 1/2\” to 1 1/2\”. The clamp jaws are lined with a non-slip material to prevent shifting in use, and an adjustment knob lets you control the clamping force to permit a firm hold without marring the work. Once set, it automatically maintains the same force regardless of stock thickness, so you can switch workpieces without making adjustments.

\n

Made of glass-reinforced nylon with a steel core for strength, the drill guide block contains three hardened steel bushings that let you space two holes 9/16\”, 7/8\” or 1 7/16\” apart, depending on material width.

\n

The jig comes with a 6 1/4\” HSS stepped drill bit that has a 3/16\” diameter by 1/2\” pilot, a 3/8\” diameter counterbore, and a 1/4\” hex shank that’s grooved for use in quick-change chucks. For easy, accurate depth settings, simply align a hole in the supplied depth collar with one of the engraved markings on the drill-bit shank, indicating the correct placement for 1/2\”, 3/4\” and 1 1/2\” thick material.

\n

For improved stability when working with sheet goods or other large stock, it also includes two sturdy stock-support wings that simply snap into place on either side of the jig and can be removed just as easily when not needed. The wings have a hinged lid that lets them double as storage boxes for other small accessories such as pocket-hole screws and drill bits. Sliding work stops, which travel on a 6\” track marked in 1/8\” increments on the top of each support wing, can be locked in position to ensure precise, repeatable hole placement up to 8 3/4\” from the edge of a workpiece.

\n

An included snap-in shroud connects directly to a 1 1/4\” vacuum hose and comes with an adapter for connection to a 1-7/8\” or 2 1/2\” hose for easy debris clearance, with a pivoting outlet that lets you orient the hose to avoid obstruction. The jig also comes with a table clamp that can be used to secure the jig to a workbench or other work surface, a combination hex key and material-thickness gauge, two #2 square-recess drivers (6\” and 3\” long), and 160 pocket-hole screws (one hundred 1 1/4\” screws and sixty 2 1/2\” screws).

“,

Reviews

There are no reviews yet.

Be the first to review “Kreg 720 Pro Pocket-Hole Jig”

Your email address will not be published. Required fields are marked *

Cart

Your Cart is Empty

Back To Shop