CRC ADOS F2 Contact Adhesive 1L

CRC F2 is a high-performing, versatile contact adhesive that’s water resistant and flexible. The high bond strength can bond most materials and substrates, and it’s easy to apply with no clamping needed. Perfect for a wide range of marine applications.

Application Instructions

Use a brush or roller. Apply a thin, even layer of adhesive to both surfaces; brushing in short, quick strokes. Between 10-20 minutes, the solvent should have evaporated and the adhesive should be tacky enough to bond the surfaces together. A useful indication is to touch the surfaces (all over) with a clean finger: if they are sticky to the touch, without transferring to your finger, they are ready to bond together. It is imperative that no solvent is trapped between the bond. Position components accurately, as when contact is made, the bond will be immediate. Apply maximum overall instant pressure, taking care to expel any air bubbles, to ensure a complete bond. Use of a hand pressure roller, e.g. a vinyl-flooring roller, provides good direct pressure. An alternative method is heat reactivation to 80°C. In this case, care must be taken to ensure that all solvent has evaporated before heating.